11 results found

1. On-Premise (onprem) Runtime

   Some customers need to run Flow Connect on their premises (on-prem) for different reasons.

   1. Data requirements – Strict data security/privacy/legal requirements where the data is not allowed to leave the premises. For these types of customers, it is essential that everything runs on-prem since they don’t want any connection to the outside networks.
      Some examples:
      • Aerospace & defense
      • Defense manufacturing
      • Healthcare
      • Government and public sector

   2. Low-latency requirements - Some customers have low-latency requirements with systems handling a high volume of transactions/executions. Typically, their existing infrastructure/external systems are already on-prem due to the exact reason. For these types of customers, flow connect adds a roundtrip through the cloud to access the data that’s already in their premise. This adds to the latency. It would be beneficial for this customer category to avoid the roundtrip through cloud infrastructure and be able to access their data locally.
      Some examples:
      • High volume manufacturing
      • Retail
      • E-Commerce

   3. Intermittent connectivity – some customers do not have stable, always available internet connectivity due to the nature of the work they do. This does not mean they are not connected to internet at all. Rather internet connectivity is not a guarantee. Even if the internet is available, it might not be stable or with very low bandwidth. These customers want to carry on their work while being offline and once they are connected to internet, they want to sync their data/transactions/executions. We can divide this into two subcategories depending on how long they are disconnected from internet.
      a. Short term disconnection
      Typically, the disconnect from the internet lasts from a few hours to a few days. Examples include service technicians who goes into the field to carry out his work, field operations, mobile service units, etc.

   b. Long term disconnection
   The disconnect is long-term ranging from few months to a year or so. Example includes mining & oil rigs, fishing & maritime, engineering & construction sites, etc.
   Suggested approach
   The section below describes the approach RnD could take on handling some of the use cases/requirements mentioned above. It’s also important to note that the suggested approach will not cover all the requirements and use cases.
   RnD wants to avoid taking a big-bang approach, but instead take a step-by-step approach where we solve one problem at a time and build on it. This would allow RnD to get feedback on the first step before moving on to the next steps.
   Definitions & Disclaimers
   • Design Time – The part of Flow Connect where the application packages/apps/components are designed and deployed to different environments. Design time also includes defining the connector configuration for the apps. So, Flow Hub, Flow Designer, and Portal Designer falls under design time. Please note that in the suggested approach the design time will always be in the cloud.

   Stage 1 – Online on-prem
   This solution involves running some parts of the Flow Connect runtime on the customer's local network. This lets Flow apps run machine steps directly on local systems without needing to connect to the internet/Novacura Cloud. The Internet is still needed to login to the flow connect client and to download the Application packages, apps, and components. However once logged in and loaded, the execution will be routed through the customer's local network. The following diagram illustrates the flow of data with this approach on a high-level.
   Suitable for:
   • customers with low-latency requirements - since the execution occurs locally it is an efficient solution.
   Limitations:
   • As mentioned previously, Design time will be always cloud only.
   • Internet is still needed to authenticate with Novacura Flow Connect and download app packages/apps/components/modules/configurations.
   Out of Scope
   • On-prem design time
   • Web client on-prem (web client delivered from a local on-prem service)
   • Integrations

   Stage 2 – Runtime on-prem
   Stage 2 builds on top of Stage 1 where more services run on the customer's site. The goal of this step is to run flow connect apps without the need to communicate with the Novacura cloud. With this solution,
   • Users will be able to authenticate themselves locally
   • App packages/apps will be delivered from a service running on-prem
   • Execution of machine step will be 100% on-prem (modules and connector configurations delivered from a local service)
   Suitable for:
   • Customer who wants their apps to work without being connected to the internet for a longer period (Long-term intermittent connectivity).
   • Customers who do not want any of their data to be exposed outside.
   Limitations:
   • Design time is still cloud only.
   • Data can be updated on-prem but no syncing back to cloud is allowed.
   • An internet connection is needed occasionally to be able to receive updates from the Novacura cloud.
   Out of Scope
   • On-prem design time
   • Integrations
   Considerations
   Although stage 2 looks very appealing it is an inherently complex solution with many unknowns (the diagram is an oversimplification). It will require a significant amount of work and time to fully implement for production level. There are many unknowns when it comes to different services that will require their own PoC before starting to implementation.

   Offline client
   Offline functionality makes it possible to work with flow apps without an internet connection for a short period of time. For offline functionality to work it is required that the data needed to execute apps are downloaded beforehand. With offline functionality all transactions that are produced by the apps while offline are put in a queue. Then The transactions are executed automatically in the background when the device has internet access.
   Suitable for:
   • Field operations, service technicians, etc. who are disconnected from the internet time to time. (short-term intermittent connectivity).

   Summary
   • Customers who want everything on prem will not be covered with the suggested solutions since design time will always be in the cloud.
   • Customers with Low-latency requirements will be covered with Stage 1 of the proposed solution.
   • Customers with Long-term intermittent connectivity requirements can be covered with Stage 2 of the proposed solution. However, it is a huge undertaking with a lot of unknows parts.
   • Customers with Short-term intermittent connectivity requirements will be covered with offline client functionality.

   Some customers need to run Flow Connect on their premises (on-prem) for different reasons.

   1. Data requirements – Strict data security/privacy/legal requirements where the data is not allowed to leave the premises. For these types of customers, it is essential that everything runs on-prem since they don’t want any connection to the outside networks.
      Some examples:
      • Aerospace & defense
      • Defense manufacturing
      • Healthcare
      • Government and public sector

   2. Low-latency requirements - Some customers have low-latency requirements with systems handling a high volume of transactions/executions. Typically, their existing infrastructure/external systems are already on-prem due to the exact reason. For these… more

   32 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Clients (Webclient, Android, iOS)  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminPaul Phillips (VP Product Management, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

2. Customized Button Placement in Clients

   The suggested improvements to the current system involve enhancing the user experience and customization options in the graphical user interface (GUI). The proposal includes two main features:

   1. Customizable Button Placement: The users express a strong interest in having the freedom to choose where the buttons (outputs) from user steps appear in the GUI. Currently, the system only allows the selection of priority, but the buttons always appear in the bottom right corner of the user step. The proposal seeks to provide flexibility, allowing users to position the buttons according to their preference, resulting in a more intuitive and user-friendly interface.

   2. Button Color Customization: Another requested feature is the ability to assign different colors to the buttons. For example, the proposal suggests using green for "go," orange for "pause," and red for "stop." By introducing this capability, the GUI can offer visual cues that align with the specific action associated with each button. This color customization enhances usability and clarity, making it easier for users to identify the intended functionality of the buttons at a glance.

   The suggested improvements to the current system involve enhancing the user experience and customization options in the graphical user interface (GUI). The proposal includes two main features:

   1. Customizable Button Placement: The users express a strong interest in having the freedom to choose where the buttons (outputs) from user steps appear in the GUI. Currently, the system only allows the selection of priority, but the buttons always appear in the bottom right corner of the user step. The proposal seeks to provide flexibility, allowing users to position the buttons according to their preference, resulting in a more intuitive and user-friendly interface.

   2. … more

   29 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   6 comments  ·  Designer  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminAndreas Berggren (Admin, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

3. Support Push Notifications for Swimlane Handovers with Multiple Languages

   We would like to Enable push notifications for Swimlane Handovers to support multiple languages in the text.

   9 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   2 comments  ·  Designer  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminPaul Phillips (VP Product Management, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature in Flow Connect. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

4. Flexible layouts

   User steps need flexible layouts to support dynamic, section based designs to place buttons and controls exactly where you need them.

   7 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Clients (Webclient, Android, iOS)  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminAndreas Berggren (Admin, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

5. Option for Daylight Saving Adjustments in Addition to Static UTC for Scheduled Workflows

   As a user, I would like the option for scheduled workflows to adjust for daylight saving changes, as the system currently only supports a static UTC setting. Adding this flexibility would accommodate different timing needs, allowing for both local time adjustments and consistent UTC scheduling.

   4 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Integration  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminPaul Phillips (VP Product Management, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature in Flow Connect. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

6. Facilitate debugging of offline flows in flow studio

   Currently, the inability to run offline flows in debug mode in Studio complicates development and testing, significantly increasing development time. Resolving this issue soon will streamline the process and improve efficiency

   3 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  Clients (Webclient, Android, iOS)  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminMalin Johansson (Admin, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

7. Feature to log REST calls

   It would be nice if we could log somehow if an enduser run a workflow and during a REST call an error occurs, then later a developer could check these log files. Or if the issue is not reproducable in DEV environment, only in PROD/TEST env. (like a similar functionality in Flow Classic).

   A use-case from partner:
   "If the user experience problems occasionally and we can’t recreate it in the debug.
   Another example, sometimes when I get long responetimes during testing I cannot see if that is because of M3 or not. Next time I run it it is quick again."

   It would be nice if we could log somehow if an enduser run a workflow and during a REST call an error occurs, then later a developer could check these log files. Or if the issue is not reproducable in DEV environment, only in PROD/TEST env. (like a similar functionality in Flow Classic).

   A use-case from partner:
   "If the user experience problems occasionally and we can’t recreate it in the debug.
   Another example, sometimes when I get long responetimes during testing I cannot see if that is because of M3 or not. Next time I run it it is quick… more

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Connectors  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminOla Carlander (Admin, Novacura) responded

   We are happy to inform you that development work has begun on the telemtry feature which will allow for such logs. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

8. Align List Input side by Side

   Hi,

   During designing I often found below thing would have been good to have.

   Align list inputs side by side which will help to put meaningful LOVs side by side.

   Please analyse

   BR,
   Bhaskar

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Designer  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminAndreas Berggren (Admin, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

9. AI Flow builder

   Problem: Creating workflows manually can be time-consuming and error-prone, especially for complex business processes. Businesses need a faster, more accurate way to generate workflows that align with their domain and data models.
   Why It Matters: Manual workflow creation delays application development and increases the risk of misalignment with business objectives, leading to inefficiencies and higher costs.
   Proposed Feature/Idea
   Solution: Use AI to automatically generate workflows from user inputs, such as:
   A prompt described in plain language (e.g., "Create a workflow to move inventory parts").
   Existing business process or data model diagrams (e.g., BPMN, UML).
   What It Does: AI analyzes the input to:
   Understand the business logic.
   Create workflows (like the one in the attached image) that can be directly used as a domain and data model in the low-code platform.
   Example: Input a business prompt or upload a diagram, and the system generates a workflow like the "Move Inventory" process diagram in the attachment.
   Business Impact
   Time Savings: Reduces workflow creation time by up to 80%.
   Error Reduction: Ensures workflows are consistent and accurate based on predefined business rules and domain models.
   Scalability: Enables faster scaling of applications by automating repetitive workflow design tasks.
   Key Features/Capabilities
   Input Options:
   Plain-language text prompts.
   Uploaded business process or data model diagrams (e.g., JSON, XML).
   AI-Powered Generation:
   Natural language processing to interpret text.
   Diagram parsing to identify workflows and relationships.
   Workflow Outputs:
   Fully editable workflows in the low-code platform.
   Integration-ready domain and data models.
   User Feedback Integration:
   Allow users to edit and refine workflows with suggestions provided by AI.

   Problem: Creating workflows manually can be time-consuming and error-prone, especially for complex business processes. Businesses need a faster, more accurate way to generate workflows that align with their domain and data models.
   Why It Matters: Manual workflow creation delays application development and increases the risk of misalignment with business objectives, leading to inefficiencies and higher costs.
   Proposed Feature/Idea
   Solution: Use AI to automatically generate workflows from user inputs, such as:
   A prompt described in plain language (e.g., "Create a workflow to move inventory parts").
   Existing business process or data model diagrams (e.g., BPMN, UML).
   What It Does: AI analyzes the… more

   •  

   •  

   •  

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   3 comments  ·  AI  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating
   started  ·  AdminPaul Phillips (VP Product Management, Novacura) responded

   We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

10. Test function in a HTTP Step

    To speed up development on IFS Cloud or any other REST APIs it would be super useful to have a "Test" part of the HTTP step.

    In the Test part (a new Tab maybe) you would have the possibility to pass params, se the response and directly turn response from a test call into a response structure in the Response Handling part (similar to "Generate from example")

    This would greatly speed up the development of apps on REST APIs and would make development of IFS Cloud App be faster than in Flow Classic!

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Designer  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    started  ·  AdminPaul Phillips (VP Product Management, Novacura) responded

    We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.

11. Include "In" operator in Portal 2 Filter.

    In portal2 we have the option to use filter with different type of operator’s, and we would like to be able to use the operator “IN” to allow multiselect in the filter like for example

    Work order

    90,91

    Select both work order 90 and the 91 and filter accordingly

    1 vote

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Portal  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    started  ·  AdminMalin Johansson (Admin, Novacura) responded

    We are happy to inform you that development work has begun on your requested feature. Our product team has assigned resources and is actively working on implementing it. We will keep you updated on its progress.