58 results found
-
Temporary Editable Columns Table Portlet
Currently, modifying values in a table requires the use of Edit Operations. However, there is a need to allow temporary or inline editing of table records without employing Edit Operations. This would enable users to make temporary changes to selected records and then execute a custom workflow using a special button. The workflow's InputTable would include all records, reflecting any changes made.
3 votes -
Persistent Rendering of Results in Scheduler
Currently, when users render a result in the scheduler, then navigate to a different page, and later return to the scheduler page, the previously rendered result is not retained. This behavior contrasts with the functionality found in the filter portlets and the Gantt portlet, where results persist through page navigation.
We propose that the scheduler should retain the rendered results even after navigating to a different page and then returning. This persistent rendering will provide a more consistent user experience and align the scheduler's functionality with other parts of the system.
3 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
-
Linked Highlighting of Allocations in Scheduler
Scheduler is often being used to manage allocations, with multiple allocations often tied to a single operation. While these allocations are perceived as the same object, they aren't currently treated as such in the Scheduler.
We propose a feature that enables linked highlighting of allocations tied to the same operation. When one instance of the operation is selected, all corresponding allocations should be highlighted. The actual selected instance could be distinguished with a unique color while other instances are highlighted with another color. However, when interacting with a single instance (e.g., dragging it forward in time), only that instance should…
3 votes -
Alternate Line Coloring in Scheduler
In the current design of the Scheduler, there is no option to alternate the color of lines. This can make it difficult for users to distinguish between tasks, especially when dealing with resources that have many lines and a long planning horizon.
We propose adding a feature to configure alternating colors for each line in the Scheduler. This "zebra striping" will enhance visual distinction between tasks, making it easier for users to navigate and manage their tasks and resources, especially over long planning horizons.
3 votes -
Improved Week Navigation in Scheduler
Currently, when changing between weeks in the scheduler, it adds a week on top of the current day, rather than moving to the start of the next week (Mon-Fri). This behavior contrasts with the functionality when stepping to the previous week, where it scrolls back to Monday.
We propose modifying the week navigation in the scheduler to ensure that moving to the next week always takes the user to the start of that week (Monday). This adjustment will create consistent behavior when navigating between weeks and align more closely with user expectations.
3 votes -
Dynamic Date Filter Configuration in Gantt Portlet
The default values of the date filter in the Gantt portlet are currently based on today's date. This setup requires manual adjustments when looking at historical data, which can be cumbersome and time-consuming for users.
We propose adding the ability to configure the end of period default value based on the start of period value in the Gantt portlet. For example, if the start of the period is set to two months ago, the end of the period could automatically be set to two weeks after that. This dynamic configuration would enable users to more quickly and intuitively navigate through…
3 votes -
Configure app execution screen location per Portal button
Why?
End users experience Portal buttons as part of the solution, not as generic web client launches. Today, the app execution window location is not controlled per starting point, which can make the experience feel inconsistent or less tailored to the user workflow.What?
Allow a designer to define the app execution screen location individually per Portal button.As an alternative or fallback, allow the end user to set and save the screen location per started app, regardless of whether it was launched from a button, double-click, or another start action. The saved location should be remembered per started app.
…
2 votes -
Inbox
Inboxes in the portal (Connect)
2 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
-
Facilitate adding bar to line chart in portal2 similar to portal1
Facilitate adding bar to line chart in portal2 similar to portal1
2 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
-
Chatbot Assistance in Custom Content Portlet
Use a chatbot to help build the CSS and HTML in the portlet.
2 votes -
Allow Scheduler Portlet to listen to "onRefresh" of other portlets, particularly the record viewer
In some instances the drag-and-drop functionality of the Scheduler is not ideal, but you still want to display the data in a Scheduler and edit it in a separate portlet like the Record Viewer. This works, however the changes are not reflected in the Scheduler portlet until it is refreshed, and you cannot set a Scheduler portlet to listen to OnRefresh from a Record Viewer Portlet.
2 votes -
Portal Scheduler: allow buffering of changes / What If Mode
In the current Portal 2, drag&drop option, resizing or moving of tasks get synchronized and data set is loaded again.
It would be great, if we have options here. Eg. the changes are not synchronized and only shown right away.
Datasets can be big and load for 1 - 5 seconds, if a lot of resizing happens, this is noticeable to the enduser. I could see more than one solution:
- add option to synchronize changes instantly (todays functionality)
- add option to trigger all changes
- synchronize the changes in the background (similar to offline functionality). This would only…2 votes -
Text and TAB alignment from Right to Left
Hi,
Thanks for this forum to share ideas.
We have an existing client engagement where client wants to explore below options.
show the tabs ,buttons in a portlet to be aligned right to left
all text to be shown and to be entered from right to leftThis requirment is very common in teh middle east region clients and as we don't have any existing feature to in-corporate teh same, can we check teh pheasibility and develop something similar.
Regards,
Bhaskar2 votes -
Can items remain highlighted once clicked on them?
Is there any way that when adding records for an employee, the name stays highlighted. After each record I enter, I have to re-click on the name to enter more or even see anything pertaining to the employee.
the user wants the name to be able to remain highlighted while they are doing processes for named user until the processes are completed instead of having to click on the user name each time to create additional processes for them.
2 votes -
Add the "Contains" operator for list of values filters
When a filter field is setup with the "List Of Values" for the "Edit as" type, it would be very helpful to be able to select the "Contains" operator. Currently the "Equals" operator is the only available selection for list of values fields.
2 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
-
Portal2 Gantt schedule sorting
Portal2 Gantt sorting by click on one of the columns presented. Example: Standard sorting is to sort by work task number. One of the columns shown is equipment object id or department and the user wants to sort by Equipent object by click on that column. (or date, or department, or priority etc)
2 votes -
Today button in Gantt
This comes from Billerud: As a user
I want to be able to click one button to navigate to the current date
so that change dates to look at information but still with one click come back to the now2 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
-
Improved List of Values Display in Portal2 with Filtered Inputs
In Portal2, when using a List of Values (LoV) tied to a table column, there seems to be an issue displaying the data if the LoV's data source is a Flow with an input filter. The data is displayed if no input filter is considered, but it does not show up when inputs are taken from Portal.
Proposed solution is to address the inconsistency by ensuring that the List of Values in Portal2 displays data correctly even when the LoV uses a Flow with input filters from Portal. It's crucial to provide consistent visibility and accessibility of data irrespective of…
2 votes -
Option to link datepicker as listener for Gantt Portlet
Currently, users must manually select dates in both the filter portlet and the Gantt date picker when they wish to restrict the data source to specific dates. This process is tedious and requires the portlet to load twice.
We propose a feature that allows synchronization between date pickers in the filter portlet and the Gantt. There should be a setting in the listening portlet that enables users to link its date pickers to one or two date pickers in the filter portlet. When the user filters on specific dates, the linked date pickers should automatically update, reducing manual steps and…
2 votes -
Enhanced and Customizable Highlighting for Scheduler
Currently, the visual emphasis when an object is selected in the Scheduler is quite subtle. This could potentially cause users to struggle in identifying their selected object, especially in a dense schedule.
We suggest enhancing the object highlighting functionality in the Scheduler. This could involve introducing a more pronounced visual cue, like a more prominent shadow or highlight. It would be beneficial to make the intensity of this visual cue customizable. Additionally, users should be allowed to choose the color of the highlight, providing another layer of customization and personalization.
2 votesThank you for voting on this feature request. Our product team is currently reviewing it and evaluating its feasibility and potential impact. We will keep you updated on any progress.
- Don't see your idea?