Skip to content

Novacura Flow Classic

Welcome to the ideas forum for Novacura Flow. Please share your ideas for how we can make Novacura Flow better. We are listening and we use this feedback to prioritize our roadmap!

Novacura Flow Classic

Categories

87 results found

  1. When changing a fragment and updating dependencies it can be VERY confusing to follow the changes in Flows that have been changed.
    In complex flows using a lot of fragments, some flow specific and some used in a lot of flows, when i do changes and want to update PROD i can frequently see that between my changes and the last shared version to PROD other changes have been made, but i cannot see a comment other than "Auto updated version dependencies". If there is a comment in the changed fragment, please use that comment in all dependencies as well,…

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  2. When you have a considerable amount of connectors it is not that easy to locate the connector you are looking for. If connectors can be grouped based on the type and then sorted alphabetically within the group will add immense value to the flow developers.

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  3. When changing a input type (say list selection with a menu) values need to be copied manually one by one. This is prone to error.

    It would be ideal if comparable data is copied into the correct fields so any changes in the user step items could be done without loss of data

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  4. we would like to get rid of unnecessary and misleading warning messages when updating flows up the dependency chain

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  5. Please allow us to brand/color the studio based on the connection.

    I frequently work in different flow environments and it is really easy to switch to the wrong studio window.

    If I could either
    1)set the branding on the server level so all studio logins for that server had the same color/branding whatever
    2) or set the branding locally in studio

    ...that would be great

    My thoughts are
    1) Allow for the studio header/border to be a different color
    2) Make the SERVER I'm connected to more prominent, like in the same area as "Application/Environment/Monitoring"

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  6. As a flow designer, I would like to see the Flow Task name and if possible also the Workflow Name for each of the log items. This would allow me to understand exactly where the problem is and shorten the time needed to fix the issue for the Flow users

    3 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  7. We would like to have a feature to facilitate encode/decode Base64 with flow script function and be able to convert a flow variable to a binary file format.

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  8. we would like to have schedule cleaning jobs that clean treasure files and what is now saved on the server.which would maybe feel more safer and reasonable if we’d be able to write this from the Studio

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  9. When a process is changed or altered it takes manual testing of scenarios. It takes time of a QA resource to a somewhat a repetitive task.

    It would be nice to have a a process to record test scenarios (and incrementally add new scenarios, value combinations etc.) so those previously envisioned scenarios can be tested automatically every time something changes in the flow.

    Feature could give out a summary of the testing along with the scenarios, values or flow steps that got failed during the testing

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  10. When using the flow environment connector to change language, we would like the language to change directly inside the flow, without having to log in or go to settings and change the language.

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  11. Support for multiple languages in Flow can be a involved process and with many large workflows in a solution it can be challenging to provide a consistent translation (and terminology!) in your apps. In the translation industry, a common way to work is to have a side-by-side or spreadsheet view of all text with the original language on one side and the translations on the other. I would love it if the Languages tab in Environment could collect all text from one or multiple apps and then put that text in a table with editable fields where you can enter…

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  12. When I have a datagrid and I change the column type on a column, please keep the attributes that are the same.

    for example, I had a number column with Title = QTY

    I had to change it to text, but when I did I lost the Title and all the translations.

    If I had previously set a value on a column for Title or Color or any attribute that is the same for the new column type, please keep the previous value.

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  13. Similar to how many other node based software allow you to hold a hotkey and draw through arrows with your cursor to "cut" the arrows, this could be very useful in Flow.

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  14. This is related to ideas https://ideas.novacura.com/forums/953926-novacura-flow-classic/suggestions/47158924-change-sql-validations-in-studio and https://ideas.novacura.com/forums/953926-novacura-flow-classic/suggestions/47473418-update-the-version-of-the-sqlparser. Sometimes Flow Studio will flag steps with a yellow "non-critical" error because Flow can't parse the code correctly. Most often I see this in SQL Server machine steps, but it can happen in other kinds of connectors too. While it would of course be lovely if the parser could be better, I think it will be hard to make it 100% correct. That's why I would like a RMB option to Ignore a yellow error on a machine step, sort of like when I want a word processor to stop flagging…

    3 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  15. When stepping through a workflow with breakpoints, the step that is about to be activated is highlighted. This could be made clearer by instead highlighting the arrow leading to the next step, indicating exactly what is about to happen. This would also show which path has lead to a step with multiple inputs.

    3 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  16. In Flow Studio, users encounter a challenge where some column names appear twice in the variable list without any indication of their originating table. This lack of distinction can lead to confusion and potential errors in selecting the correct variable.

    Proposed solution is to enhance the variable list display to include the source table's name along with the column name. This will enable users to easily distinguish between variables with the same name but from different tables, thereby reducing confusion and improving accuracy in variable selection. Implementing this feature could involve a format like "TableName.ColumnName" or a similar approach that…

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  17. When you create a sequence arrow then right click, there is no need to have the word "CREATE" before each element.

    Additionally, the list could be alphabetized to easier find the type of element you want to add.

    4 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  18. Update to the latest version of the SqlParser For Special SQL Server Functions such as string_agg([Column], [separator]) function in combination with "WITHIN GROUP (ORDER BY [Column])"

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  19. We have startad using a lot of images in our Flows to show product images. There are however quite some limitations in this area.

    I would like a see a Image function that allows us to display a image in any element.

    The function should take image source, width and height (and maybe something to keep aspect ration or not). The width and height would rezise the image server side for faster load times on the client.

    Img(url, 300, 300, 1)

    This would allow us to display a list of items with images in List Selection Input or in a…

    2 votes

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
  20. When I copy an element, I want to be able to right click on a sequence arrow and paste. As things stand I have to paste onto the canvas and then drag until I get the green arrow. I should be able to right click and "insert copied element."

    1 vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Studio  ·  Admin →
    How important is this to you?

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)
← Previous 1 3 4 5
  • Don't see your idea?